SW-SERIES
inverters		 DR-SERIES Inverters TS/TIGER-SERIES
inverters		 UTILITY TIE SYSTEMS/INVERTERS
"SW" Series Power Panel Systems  "DR" Series Power Panel Systems SOLAR CHARGE & DC LOAD CONTROLLERS METERS/REMOTE CONTROLS
UTILITY TIE SYSTEM OPTIONS Power Panel Options BATTERY CABLES CONDUIT BOXES

 

SW-SERIES
Sine wave inverter with 3-stage battery charger, automatic AC transfer relay and built-in LCD control panel. For stand alone or utility interactive applications. Includes automatic generator start system and battery temperature sensor standard.
Wall or shelf mount:  9" deep (22.8cm), 22.5" wide (57.2cm), 15.1" high (38.3cm)  
Unit weight: 90, 105 or 136 lbs (42, 48 or 63 kg)  
Shipping size: 20.5" deep (52cm), 27" wide (68.6cm), 15.5" high (39.5cm)
Shipping weight: 96 lbs, 111 or 143 lbs (44, 50 or 65 kg)  
CALL FOR DISCOUNT PRICING!!!!!!
SW2512 2.5 kva - 12 vdc input, 120 vac 60 Hz output with 150 amp charger and 60 amp AC transfer relay $2675.00
SW4024 4.0 kva - 24 vdc input, 120 vac 60 Hz output with 120 amp charger and 60 amp AC transfer relay $3495.00
SW4048 4.0 kva - 48 vdc input, 120 vac 60 Hz output with 60 amp charger and 60 amp AC transfer relay $3495.00
SW5548 5.5 kva - 48 vdc input, 120 vac 60 Hz output with 70 amp charger and 60 amp AC transfer relay $3995.00
SW Accessories
SWU-* REV. 4.01 Software upgrade for "SW" series inverters (Chipset). *Specify model when ordering. $125.00
SWRC Full function remote control with LCD display for all "SW" series inverters. 25 foot (8m) cable standard. $295.00
SWRC/50ft As above with 50 foot (16m) cable (specify /50 when ordering). Not advised for distances over 50 feet. $329.00
SWI Stacking interface for two "SW" inverters. Provides 120/240vac, 3 wire and twice the power @ 240 vac. No "E" models. $45.00
SWI/PAR Sine wave paralleling kit. Connects two sine wave inverters together for twice the output power at the same voltage. USA only. $345.00
SWI/PAR-E Same as above for export "E" version inverters only. $345.00
SWODE Enclosure for outdoor installation of one SW-series inverter. Does not include AC/DC breakers. ETL listed $371.00
SWCB Conduit box for all SW-series - fits on DC or AC end of inverter. 1/2", 3/4" and 2" knockouts. Adds 6" (15cm) $94.00
SWCA Sine-wave Communications Adapter allows PC connection and monitoring of one SW series inverter. Requires REV 4.01 software (or higher) for data logging to work. Includes adapter, DOS based software, 50 feet (16m) of cable and DB9 connector. $175.00
DR-SERIES
Modified sine wave inverter with 3-stage battery charger and automatic AC transfer relay. Designed for remote off grid and utility back up systems for both residential and commercial applications.
Wall or Shelf mount: 7.3" deep (18.4cm), 21.5" wide (54.6cm), 8.5" high (21.6cm)  
Unit Weight: 35, 45 or 49 lbs (16, 21 or 23 kg)  
Shipping size: 12" deep (30.5cm), 25" wide (63.5cm), 13" high (33cm) 
Shipping weight: 38, 48 or 52 lbs (17, 22 or 24 kg)
DR1512   1.5 kva 12vdc input 120 vac 60Hz output with 70 amp charger and 30 amp AC transfer relay. $1029.00
DR1524 1.5 kva 24vdc input 120vac 60 Hz output with 35 amp charger and 30 amp AC transfer relay. $979.00
DR2412 2.5 kva 12vdc input 120vac 60 Hz output with 120 amp charger and 30 amp AC transfer relay. $1395.00
DR2424 2.5 kva 24vdc input 120vac 60 Hz output with 70 amp charger and 30 amp AC transfer relay. $1395.00
DR3624 3.6 kva 24vdc input 120vac 60 Hz output with 70 amp charger and 30 amp AC transfer relay. $1595.00

DR Accessories
BTS/15 Battery temperature sensor for "SW", "DR", "UX" & "TS"-series inverters, solar controllers. 15 foot (5m) cable $29.00 
BTS/35 Battery temperature sensor with 35 foot (11m) cable (included standard on all power panel systems). $32.00
RC8/50 Remote On/Off control with status LED indicator for all "DR", "UX", "TS"-series. 50 foot (16m) cable standard.   $69.00 
DRI Stacking kit for stacking two DR inverters. Provides 120/240 vac and twice the power at 240 vac. (USA only). Includes two 1.5 foot battery cables and the stacking communications cable. $85.00
DRCB Conduit box for all "DR"-series - fits on DC or AC end of inverter. 1/2", 3/4" and 2" knockouts. Adds 6" (15cm). $69.00
TS/TIGER-SERIES
Modified sine wave inverter with optional 3-stage battery charger & automatic transfer relay. Designed for small off grid and utility backup applications.  These small compact units provide from 500 to 800 watts of modified sinewave output at 120 VAC. The units come with two standard AC outlets. TigerSeriesInv.jpg (27432 bytes)
Shelf or Wall mount: 8" (20.3cm) deep, 10.5" (26.7cm) wide, 5.75" (14.6cm) high
Unit weight: 16 to 17 lbs (7.3 to 7.8 kg)
Shipping size: 13" deep (33cm), 15" wide (38cm), 12" high (30.5cm)
Shipping weight: 19 to 20 lbs (8.6 to 9.1 kg)
TS512 500va 12vdc input 120vac 60hz output without charger and AC transfer relay $395.00
TS512SB 500va 12vdc input 120vac 60 Hz output with 15 amp charger and AC transfer relay $495.00
TS524 500va 24vdc input 120vac 60 Hz output without charger and AC transfer relay $395.00
TS524SB 500va 24vdc input 120vac 60 Hz output with 15 amp charger and AC transfer relay $495.00
METERS/REMOTE CONTROLS
Specify the inverter's DC voltage and whether for an export model when ordering.
Trace Meter 500 - NS Amp hour voltage system meter. No shunt. (Requires 500A/50 "mv" shunt For 12 & 24 volt DC systems only) $195.00
Trace Meter 500 Amp hour voltage system meter. Comes with shunt. For 12 & 24 volt DC systems only. $245.00
TM 48 48 volt DC adapter for Trace Meter 500 $40.00
CONDUIT BOXES
For installing an inverter to meet applicable codes and safety standards using conduit for wiring.
SWCB  Conduit box for SW-series. Fits on DC or AC end of inverter. 1/2", 3/4" and 2" knockouts. Adds 6" (15 cm). $90.00 
DRCB  Conduit box for "DR" series. Fits on DC or AC end of inverter. 1/2", 3/4" and 2" knockouts. Adds 6" (15 cm). $65.00 
SOLAR CHARGE CONTROLLERS and DC LOAD CONTROLLERS
C60  60 amp 12 or 24 volt DC, 3-stage solid-state solar charge control OR load controller OR diversion controller with status LED, electronic over current protection, manual equalization mode and adjustable set points. $245.00  
C40  40 amp 12, 24 or 48 vdc, 3-stage solid-state solar charge control OR DC load controller OR diversion controller with status LED, electronic over current protection, manual equalization mode and adjustable set points. $195.00  
C35 35 amp 12, 24 or 48 vdc, 3-stage solid-state solar charge control OR load controller OR diversion controller with status LED, electronic over current protection, manual equalization mode and adjustable set points. $145.00
C12  12 amp, 12 vdc, 3-stage solid-state solar charge control and DC load control with nightlight mode, status LED, low battery disconnect, electronic over current protection and adjustable set points. $110.00 
C12-20  Bulk packed C12 solar charge controllers (quantity of 20 individually packed in a single box). ($100 ea.) $2,000.00 
C30A  30 amp, 12 or 24 vdc relay type solar charge controller with adjustable set points and night time shut off. $110.00 
C30  30 amp, 12 or 24 vdc load control relay with adjustable set points and active high or low operation. $110.00 
DVM/C40  Digitial meter mounts onto the front of C35/C40/C50 charge controller. Displays volts, amps, re-setable and cumulative amp hours for a solar array, DC loads or diversion loads (depends on application) $90.00
C40R/50  Remote display for the C35/C40/C50 with 50 foot connector card for remote installation. $115.00
C40R/100  Remote display for the C35/C40/C50 with 100 foot connector card for remote installation. $135.00
OTHER TRACE PRODUCTS and ACCESSORIES
T240  120-240 volt step-up or step-down transformer, maximum continuous power, 4.5 kW $350.00 
BATTERY CABLES
UL listed flexible cable with ring terminals. NEC rated in conduit for 230A (4/0 AWG) or 175A (2/0 AWG) and in free air for 360A (4/0 AWG) or 265A (2/0 AWG). Note: NEC allows rounding up cable amp capacity to next standard fuse/ breaker size (see 240-3b).
BC3-2/0  Pair of 3 foot 2/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)  $59.00 
BC5-2/0  Pair of 5 foot 2/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)  $79.00 
BC10-2/0 Pair of 10 foot 2/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)  $129.00 
BC3-4/0 Pair of 3 foot 4/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)  $79.00 
BC5-4/0  Pair of 5 foot 4/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)  $105.00 
BC10-4/0 Pair of 10 foot 4/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)   $169.00
BC15-4/0  Pair of 15 foot 4/0 AWG battery cables with ring terminals and red and black heatshrink. (+/-)   $200.00 
BC1.5R-2/0 Single 2/0 AWG battery jumper cable 1.5 foot long, with ring terminals and red heatshrink. (+)  $18.00
BC1.5B-2/0 Single 2/0 AWG battery jumper cable 1.5 foot long, with ring terminals and black heatshrink. (-)  $18.00 
BC1.5RB-2/0  Single 2/0 AWG battery jumper cable 1.5 foot long, with ring terminals and red/black heatshrink. (+/-)  $18.00
BC1.5R-4/0  Single 4/0 AWG battery jumper cable 1.5 foot long, with ring terminals and red heatshrink. (+)  $22.00
BC1.5B-4/0 Single 4/0 AWG battery jumper cable 1.5 foot long, with ring terminals and black heatshrink. (-)  $22.00
BC1.5RB-4/0 Single 4/0 AWG battery jumper cable 1.5 foot long, with ring terminals and red/black heatshrink. (+/-)  $22.00 
DC DISCONNECT
DC rated circuit breaker/disconnect with indoor enclosure. Allows installation to NEC and other safety standard requirements. Designed to work specifically with Trace "DR" and "SW" series inverters for residential and commercial applications. Optional second inverter breaker, grounding/bonding block and circuit breaker allow field customization. ETL listed.
DC250  250 amp breaker with enclosure. For SW4024, SW2512, SW5548, DR3624 & DR2412 (Use #4/0 cable) $329.00 
DC175  175 amp breaker with enclosure. For SW4048, DR1512, DR1524 & DR2424 (Use #2/0 cable min.) $329.00 
GJ250  Additional 250 amp breaker (field installable). For a second, stacked or unstacked "SW" or "DR" inverter $195.00 
GJ175 Additional 175 amp breaker (field installable). For a second, stacked or unstacked "SW" or "DR" inverter $195.00 
DCBB  Negative/ground bonding block. Connects up to two #4/0 AWG negative cables and various ground system cables.  $50.00
CD60DC 60 amp circuit breaker for solar array input disconnect for a C40. Mounts on side of DC250/175.  $39.00 
CD15  15 amp circuit breaker for small DC load circuit. Mounts on side knockout of DC disconnect enclosure.  $29.00
CD20 20 amp circuit breaker for small DC load circuit. Mounts on side knockout of DC disconnect enclosure.  $29.00 
PVGFP1 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. One pole for one solar array. (100 amp Max) UL listed. $275.00
PVGFP2 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. Two pole for two solar sub-arrays. (100 amp Max) UL listed $325.00
PVGFP3 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. Three pole for one three sub-arrays. (100 amp Max) UL listed. $375.00
PVGFP4 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. Four pole for four solar sub-arrays. (100 amp Max) UL listed. $425.00
TRACE
DC rated, UL listed high current class-T fuse in a protective holder with a removable cover.  
TFB400 400 amp fuse and holder. Recommended only for stacked U2512 (use #4/0 minimum or larger cable)  $75.00 
TFB300  300 amp fuse and holder. For SW4024/5548/2512, U2512, stacked U2624/2548, DR3624 (#4/0 min.) $75.00 
TFB200  200 amp fuse and holder. For SW4048, DR1512/2424, M1512, U2624/2536 (#2/0 min.)  $53.00 
TFB110 110 amp fuse and holder. For DR1524, M1524, U2548, 812, 724, 612E& 624E (#4/0 AWG cable min.)  $53.00 
TF400  400 amp replacement fuse for TFB400 $38.00 
TF300 300 amp replacement fuse for TFB300 $38.00
TF200 200 amp replacement fuse for TFB200  $18.00
TF110 110 amp replacement fuse for TFB110  $18.00
Fuse blocks include two 5/16" (TBF 110/200) or 3/8" (TBF 300/400) stainless steel bolts and nuts - cables must include ring type lugs, standard on Trace battery cables. Fuse blocks are recommended for only non-NEC type applications such as vehicles and marine systems or as supplementary protection of batteries from short circuits.    
UTILITY TIE SYSTEMS/INVERTERS                               UT-SW4048PV copy.jpg (26232 bytes)
For utility interactive photovoltaic applications where utility back-up ability is not required. Utility Tie Systems allow direct conversion of photovoltaic (solar) energy to Utility Power without a battery storage system. The Utility Tie Systems are designed to meet or exceed utility power company requirements.
UT-SW3048EPV SW3048EPV inverter, 3300 Max. Power Output, 230 VAC/50 Hz Grid Required, 35 amp (AC), 110 amp (DC). Efficiency >90% is .2 to 2.0 kVA $4315.00
UT-SW4048PV SW4048PV inverter, 4000 VA Max Power Output, 120 VAC/60 Hz Grid Required, 60 amp (AC), 110 amp (DC). Efficiency >90% is .2 to 2.5 kVA $4315.00
UT-SW4048UPV SW4048UPV inverter, 4000 VA Max Power Output, 240 VAC/60 Hz Grid Required, 35 amp (AC), 110 amp (DC). Efficiency >90% is .2 to 2.5 kVA $4315.00
UT-SW4548EPV SW4548EPV inverter, 4500 VA Max Power Output, 230 VAC/50 Hz Grid Required, 35 amp (AC), 110 amp (DC). Efficiency >90% is .2 to 3.3 kVA $4835.00
UT-SW5548PV SW5548PV inverter, 5500 VA Max Power Output, 120 VAC/60 Hz Grid Required, 60 amp (AC), 110 amp (DC). Efficiency >90% is .2 to 4.0 kVA $4835.00
UT-SW5548UPV SW5548UPV inverter, 5500 VA Max Power Output, 240 VAC/60 Hz Grid Required, 35 amp (AC), 110 amp (DC). Efficiency >90% is .2 to 4.0 kVA $4835.00
UTILITY TIE SYSTEM OPTIONS (pre-installed):
(UTO-** options are ONLY available at the time of the Utility Tie System Purchase, the GFP cannot be purchased individually at this time)
PVGFP1 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. One pole for one solar array. (100 amp Max) UL listed. $275.00
PVGFP2 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. Two pole for two solar sub-arrays. (100 amp Max) UL listed. $325.00
PVGFP3 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. Three pole for one three sub-arrays. (100 amp Max) UL listed. $375.00
PVGFP4 Ground Fault Protection Device, required for residential photovoltaic rooftop installation on homes in the United States. Four pole for four solar sub-arrays. (100 amp Max) UL listed. $425.00
UTO-VLC40 Voltage limiting Controller (40 amps) - necessary for solar arrays with DC voltages that exceed 75 VDC open circuit. $225.00
SWCA-UT Communications Adapter - allows PC control and monitoring of the SW (PV) Series inverter $175.00
SW (PV1) Series Utility Tie Inverter: Available for indoor installation only.
SW3048EPV1 SW3048EPV inverter, 3300 VA Max Power Output, 230 VAC/50 Hz Grid Required. Efficiency >90% is .2 to 4.0 kVA. $3560.00
SW4048PV1 SW4048PV inverter, 4000 VA Max Power Output, 120 VAC/60 Hz Grid Required. Efficiency >90% is .2 to 2.5 kVA. $3560.00
SW4048UPV1 SW4048UPV inverter, 4000 VA Max Power Output, 240 VAC/60 Hz Grid Required. Efficiency >90% is .2 to 2.5 kVA. $3560.00
SW4548EPV1 SW4548EPV inverter, 4500 VA Max Power Output, 230 VAC/50 Hz Grid Required. Efficiency >90% is .2 to 3.3 kVA. $4130.00
SW5548PV1 SW5548PV inverter, 5500 VA Max Power Output, 120 VAC/60 Hz Grid Required. Efficiency >90% is .2 to 4.0 kVA. $4130.00
SW5548UPV1 SW5548UPV1 inverter, 5500 VA Max Power Output, 240 VAC/60 Hz Grid Required. Efficiency >90% is .2 to 4.0 kVA. $4130.00
"SW" (PV) Series Utility Tie Inverter Options (field installable):
VLC40 Voltage Limiting Controller (40 amps) - necessary for solar arrays with DC voltages that exceed 75 VDC open circuit. $235.00
CD110 110 amp DC circuit breaker for disconnection of DC power from the inverter to allow servicing. $60.00
Micro sine PV Module Inverter: Built to meet Utility Tie standards. 
POWER PANEL SYSTEMS POWER PANEL SPECIFICATIONS PAGE
The Trace Power Panel is a pre-assembled, integrated "balance of system" panel available with a range of capacities, DC inputs and AC output configurations and is certified to UL standards by ETL Testing Laboratories as a complete system. The "SW" Series and "DR" Series Power Panel includes all National Electric Code (NEC) required components, wiring and safety circuitry. The Power Panel meets NEMA type 1 environmental standards for indoor mounting only. All Power Panel systems offer proven Trace Engineering inverters, with all the features, performance and reliability that has made them the industry standard. Each Power Panel is shipped by truck in a wooden container unless the PPO-SB (Shipping Box) option below is ordered.
"SW" Series Power Panel Systems 
 swpowerpanelPicLo.jpg (18964 bytes) Click image for enlarged view
 
The "SW" Power Panel system comes ready for installation, pre-wired with the following:
bullet"SW" Series sine wave AC power inverter with high efficiency and bi-directional operation, includes:
- 60 amp AC pass-thru power at 120 VAC (/S=Single System) or 120/240 VAC (/D=Dual System)
- Adjustable three stage, temperature compensated battery charging
bullet175 or 250 amp DC disconnect breaker*
bullet60 amp AC disconnect/bypass breaker in box*
bulletAC and DC wiring in conduit (battery cables not included)*
bulletPowder coated steel back-plate (40" H x 43" W x 1" D)
bulletBattery Temperature Sensor*
bulletInverter Conduit Box*
bulletNegative/Ground Bonding Block
bullet500 amp/50 mV shunt (for remote metering)*These items are doubled on /D (Dual=two inverters) systems            
PP-SW2512/S SW2512 inverter, 2.5 kW power, 12 VDC input, 4/0 AWG Min. Cable**, 120 @ 60 Hz VAC Output, 150 amps charger. $4089.00
PP-SW2512/D 2 SW2512 inverters, 5.0 kW power, 12 VDC input, 4/0 AWG x 2 Min. Cable** 120/240 @ 60 Hz output, 150 amps x 2 charger. $7237.00
PP-SW4024S SW4024 inverter, 4.0 kW power, 24 VDC input, 4/0 AWG Min. Cable**, 120 @ 60 Hz output, 120 amps charger. $4995.00
PP-SW4024/D 2 SW4024 inverters, 8.0 kW power, 24 VDC input, 4/0 AWG x 2 Min. Cable**, 120/240 @ 60 Hz output, 120 amps x 2 charger. $8995.00
PP-SW4048/S SW4048 inverter, 4.0 kW power, 48 VDC input, 2/0 AWG Min. Cable**, 120 @ 60 Hz output, 60 amps charger. $4995.00

  
PP-SW4048/D 2 SW4048 inverters, 8.0 kW power, 48 VDC input, 2/0 AWG x 2 Min. Cable**, 120/240 @ 60 Hz output, 60 amps x 2 charger. $9137.00
PP-SW5548/S SW5548 inverter, 5.5 kW power, 48 VDC input, 4/0 AWG Min. Cable**, 120 @ 60 Hz output, 70 amps charger. $5695.00
PP-SW5548/D 2 SW5548 inverters, 11.0 kW power, 48 VDC input, 4/0 AWG x 2 Min. Cable**, 120/240 @ 60 Hz output, 70 amps x 2 charger. $9995.00
**Battery cables are offered only as an option and are not pre-installed on the Power Panel.
"DR" Series Power Panel Systems
The "DR" Power Panel system comes ready for installation, pre-wired with the following:
bullet"DR" Series modified sine wave AC power inverter with high efficiency operation, includes:
- 30 amp AC pass-thru power at 120 VAC (/S=Single System) or 120/240 VAC (/D=Dual System)
- Adjustable three stage, temperature compensated battery charging
bullet175 or 250 amp DC disconnect breaker*
bullet60 amp AC disconnect/bypass breaker in box*
bulletAC and DC wiring in conduit (battery cables not included)*
bulletPowder coated steel back plate (40" H x 43" W x 1" D)
bulletBattery Temperature Sensor*
bulletInverter Conduit Box*
bulletNegative/Ground Bonding Block
bullet500 amp/50 mV shunt (for remote metering)
*These items are doubled on /D (Dual=two inverters) systems
PP-DR1512/S DR1512 inverter, 1.5 kW power, 12 VDC input, 2/0 AWG Min. Cable**, 120 @ 60 Hz output, 70 amps charger. $1979.00
PP-DR1512/D 2 DR1512 inverters, 3.0 kW power, 12 VDC input, 2/0 AWG x 2 Min. Cable**, 120/240 @ 60 Hz output, 70 amps x 2 charger. $3637.00
PP-DR1524/S DR1524 inverter, 1.5 kW power, 24 VDC input, 2/0 AWG Min. Cable**, 120 @ 60 Hz output, 35 amps charger. $1879.00
PP-DR1524/D 2 DR1524 inverters, 3.0 kW power, 24 VDC input, 2/0 AWG x 2 Min. Cable**, 120/240 @ 60 Hz output, 35 amps x 2 charger. $3529.00
PP-DR2412/S DR2412 inverter, 2.4 kW power, 12 VDC input, 4/0 AWG Min. Cable**, 120 @ 60 Hz output, 120 amps charger. $2295.00 
PP-DR2412/D