Power Panel Specifications

"SW" Series Power Panel Systems "DR" Series Power Panel Systems Power Panel Options

 

"SW" Series Power Panel Systems
The "SW" Power Panel system comes ready for installation, pre-wired and with the following:
bullet"SW" Series sine wave AC power inverter with high efficiency and bi-directional operation, includes:
- 60 amp AC pass-thru power at 120 VAC (/S=Single System)     or 120/240 VAC (/D=Dual System)
- Adjustable three stage, temperature compensated battery charging
bullet175 or 250 amp DC disconnect breaker*
bullet60 amp AC disconnect/bypass breaker in box*
bulletAC and DC wiring in conduit (battery cables not included)*
bulletPowder coated steel back-plate (40" H x 43" W x 1" D)
bulletBattery Temperature Sensor*
bulletInverter Conduit Box*
bulletNegative/Ground Bonding Block
bullet500 amp/50 mV shunt (for remote metering)
*These items are doubled on /D (Dual = two inverters) systems
Part No. Inverter(s)                 Power DC Input Min. Cable** VAC Output Charger
PP-SW2512/S SW2512 2.5 kW 12 VDC 4/0 AWG 120 @ 60 Hz 150 amps
PP-SW2512/D SW2512 x2 5.0 kW 12 VDC 4/0 AWG x 2 120/240 @ 60 Hz 150 amps x 2
PP-SW2612E/S SW2612E 2.6 kW 12 VDC 4/0 AWG 230 @ 50 Hz 145 amps
PP-SW4024S SW4024 4.0 kW 24 VDC 4/0 AWG 120 @ 60 Hz 120 amps
PP-SW4024/D SW4024 x 2 8.0 kW 24 VDC 4/0 AWG x 2 120/240 @ 60 Hz 120 amps x 2
PP-SW3024E/S SW3024E 3.3 kW 24 VDC 4/0 AWG 230 @ 50 Hz 100 amps
PP-SW3048E/S SW3048E 3.3 kW 48 VDC 2/0 AWG 230 @ 50 Hz 50 amps
PP-SW4048/S SW4048 4.0 kW 48 VDC 2/0 AWG 120 @ 60 Hz 60 amps
PP-SW4048/D SW4048 x 2 8.0 kW 48 VDC 2/0 AWG x 2 120/240 @ 60 Hz 60 amps x 2
PP-SW4548E/S SW4548E 4.5 kW 48 VDC 2/0 AWG 230 @ 50 Hz 57 amps
PP-SW5548/S SW5548 5.5 kW 48 VDC 4/0 AWG 120 @ 60 Hz 70 amps
PP-SW5548/D SW5548 x 2 11.0 kW 48 VDC 4/0 AWG x 2 120/240 @ 60 Hz 70 amps x 2


"DR" Series Power Panel Systems
The "DR" Power Panel system comes ready for installation, pre-wired with the following:
bullet"DR" Series modified sine wave AC power inverter with high efficiency operation, includes:
- 30 amp AC pass-thru power at 120 VAC (/S=Single System) or 120/240 VAC (/D=Dual System)
- Adjustable three stage, temperature compensated battery charging
bullet175 or 250 amp DC disconnect breaker*
bullet60 amp AC disconnect/bypass breaker in box*
bulletAC and DC wiring in conduit (battery cables not included)*
bulletPowder coated steel back-plate (40" H x 43" W x 1" D)
bulletBattery Temperature Sensor*
bulletInverter Conduit Box*
bulletNegative/Ground Bonding Block
bullet500 amp/50 mV shunt (for remote metering)
*These items are doubled on /D (Dual=two inverters) systems
Part No. Inverter(s) Power DC Input Min Cable** VAC Output Charger
PP-DR1512/S DR1512 1.5 kW 12 VDC 2/0 AWG 120 @ 60 Hz 70 amps
PP-DR1512/D DR1512 x 2 3.0 kW 12 VDC 2/0 AWG x 2 120/240 @ 60 Hz 70 amps x 2
PP-DR1512E/S DR1512E 1.5 kW 12 VDC 2/0 AWG 230 @ 50 Hz 70 amps
PP-DR1524/S DR1524 1.5 kW 24 VDC 2/0 AWG 120 @ 60 Hz 35 amps
PP-DR1524/D DR1524 x 2 3.0 kW 24 VDC 2/0 AWG x 2 120/240 @ 60 Hz 35 amps x 2
PP-DR1524E/S DR1524E 1.5 kW 24 VDC 2/0 AWG 230 @ 50 Hz 35 amps
PP-DR2412/S DR2412 2.4 kW 12 VDC 4/0 AWG 120 @ 60 Hz 120 amps
PP-DR2412/D DR2412 x 2 4.8 kW 12 VDC 4/0 AWG x 2 120/240 @ 60 Hz 120 amps x 2
PP-DR2424/S DR2424 2.4 kW 24 VDC 2/0 AWG 120 @ 60 Hz 70 amps
PP-DR2424/D DR2424 x 2 4.8 kW 24 VDC 2/0 AWG x 2 120/240 @ 60 Hz 70 amps x 2
PP-DR2424E/S DR2424E 2.4 kW 24 VDC 2/0 AWG 230 @ 50 Hz 70 amps
PP-DR3624/S DR3624 3.6 kW 24 VDC 4/0 AWG 120 @ 60 Hz 70 amps
PP-DR3624/D DR3624 x 2 7.2 kW 24 VDC 4/0 AWG x 2 120/240 @ 60 Hz 70 amps x 2

 

Power Panel Options
Several options are available pre-installed** with wiring, conduit and fittings onto the Power Panel.
Note: These options are only available when ordered on the same purchase order as the Power Panel
Part No. Description
PPO - C40 C40 DC charge or load controller installed, includes pre-wired 60 amp, DC breaker
PPO - DVM/C40 Digital meter with LCD display installed on the front of the C40
PPO - CD15 15 amp DC load breaker pre-wired and installed in the DC disconnect
PPO - CD20 20 amp DC load breaker pre-wired and installed in the DC disconnect
PPO - CD60 60 amp DC load breaker pre-wired and installed in the DC disconnect
PPO - BC5 - 2/0 5 foot 2/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO - BC10 - 2/0 10 foot 20 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO - BC5 - 4/0 5 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO - BC10 - 4/0 10 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit.
PPO - BC15 - 4/0 15 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO - SB Heavy duty plastic shipping container, excellent for making a battery box (ID: 24"H X 46"L X 42"W)
Dual Power Panel systems (/D) require two pair battery cables . Total battery cable length that is usable is 1 foot less than the length ordered due to 1 foot required in the DC disconnect (i.e. PPO - BC5 - 2/0 is 5 feet long one-way, but 4 feet usable to the battery bank).
**Battery cables are offered only as an option and are not pre-installed on the Power Panel.

 

Literature Request Form Trace Engineering Inverters E-mail CDI@chinadiesel.com

CHINA DIESEL IMPORTS
15749 Lyons Valley Rd., Jamul, CA 91935
Phone:(800) 341-7027 FAX:(800) 404-1380
© Copyright 1997 China Diesel Imports