Kohler ERG-13 MADE IN USA $9120
Low cost shipping available!
1800 RPM Water cooled propane fired generator! Designed with commercial mobile applications in mind makes for a good off grid alternative to Diesel fueled generator.
Click on image for larger view!
Engine Features
- Port fuel injected (gasoline models)
- EPA certified
- CARB certified (requires CARB kit for gasoline
models)
- Electronic control module for optimizing fuel and
spark performance
- LP gas or gasoline fueled
- Four cylinder
- Four cycle
- Pistons have high silicon content for improved
- durability and noise reduction
- Sintered powdered-metal exhaust valve seat
inserts for enhanced durability
- Poly V-belt harmonic balancer
- Electronic governing with frequency regulation of
±1.2% on gasoline models or ±0.75% on LP models
- Lifting eye
- Electric fuel lift pump (gasoline models)
- Fuel filter (gasoline models)
- Water cooled, inline radiator cooling system
Cooling |
|
| Cooling System |
60 Hz |
| Engine coolant capacity, L (qts.) |
8.0 (8.4) |
| Heat rejected to cooling water at rated |
|
| kW, wet exhaust Btu/min. |
1567 |
| Engine water pump flow, Lpm (gpm) |
37.9 (10.0) |
| Water pump type |
Centrifugal |
| Fan diameter, including blades, mm (in.) |
390 (15.35) |
| Fan, kW (HP) |
1.2 (1.6) |
| Maximum air restriction on discharge |
|
| side of radiator, in. Hg (in. H2O) |
0.13 (0.50) |
Generator Features
- Remote start 12-pin connector
- Voltage regulation of ±1.5%
- RFI suppression
- Static excited, rotating field design permits power to be
obtained from stationary leads.
- Rotor and stator are vacuum impregnated and coated with
high-bond epoxy varnish. Varnish helps prevent corrosion in high-humidity areas.
- Rotors are dynamically balanced to minimize vibration.
- Copper windings ensure minimal heat buildup. Insulation
meets NEMA standards for class H insulation.
- Directly connected to the engine, the generator has sealed
precision ball bearings with a precision-machined steel
sleeve in the end bracket (or end bearing tolerance ring) to
prevent shaft misalignment and extend bearing life.
- Circuit breakers protect the generator from extreme
overload.
- Mounted on a rail-type tray.
- Equipped with a four-lead reconnectable stator.
ADC 2100 Advanced Digital Control
- Designed for today’s most sophisticated electronics
- Easy to read alpha-numeric display
- Compact, integrally mounted control
- Potted boards/sealed connectors for maximum
corrosion protection
- SAE J1939 CANbus output
- Remote monitoring of up to 13 fault conditions
- Membrane keypad for configuration and
adjustment
- Programmed crank cycle
Critical exhaust kit included!
Fuel Consumption |
60 Hz |
|
Gasoline, Lph (gph) at % load |
|
| 100% |
6.89 |
1.82 |
| 75% |
5.75 |
1.52 |
| 50% |
4.24 |
1.12 |
| 25% |
2.91 |
0.77 |
LP Gas, m3/hr. (cfh) at % load |
|
| 100% |
2 |
74 |
| 75% |
1.6 |
55 |
| 50% |
1.2 |
43 |
| 25% |
0.9 |
30 |
Standard rubber mounts
Kohler
ERG13 spec sheet!
